Contacts:Ernest Tel:+86 13906530810 Tel:+0573 87968816 E-mail:‍ernestlu@qq.com‍

PRODUCTS

Home Products

RX2916EV

Products > RX2916EV

RX2916EV

Basic functions
1. It has the function of scraping the ice
surface , collecting snow, and watering the ice
surface , and with a side brush.
2.This whole ice truck is an electric driven
device with 8 built-in 6V200Ah water batteries,
built in 48V power, 48V200Ah , providing
sufficient power supply for the truck's power
motor and hydraulic power unit
The appearance dimensions are:
2950 * 1600 * 1898mm.

Technical specifications of RX2916EV

Basic parameters 基本参数	长度（雪橇关闭） Length (sled closed)	2950mm
	宽度（刮刀座） Width (stake)	1600mm
	高度（雪橇关闭） Height (sled closed)	1898mm
	长度（雪橇打开） Length (sled open)	3550mm
	宽度（车身） Width (body)	1200mm
	高度（雪橇打开） Height (sled open)	2822mm
Rotating part 转动部分	驱动方式 Drive way	High power motor 48V 6kw
	轮距 Track width	1059mm
	轴距 Wheelbase	1393mm
	最大作业速度 Operating speed	25km/h
Power 功率	电压/总功率 Voltage/total power	48V/10.9kw
	上卷龙电机功率 Vertical spiral drill motor power	1200W
	下卷龙电机功率 Horizontal spiral drill motor power	1200W
	驱动功率 Accumulator capacity	48V 203A
Weight 重量	重量（空车） Weight (empty vehicle)	1580kg
Weight 重量	重量（满载） Weight (fully loaded)	2080kg
Collecting refrigerators 集冰箱	冰屑箱容量 Ice chip box capacity	1.35m³
	水箱 Water tank	500L
	整冰宽度 Whole ice width	1600mm
	水箱加满最大浇冰面积 Maximum ice pouring area	1000m²
Hardware installed in the car 已安装在车子上面的配件	横绞龙 Horizontal spiral drill	1 set
	立绞龙 Vertical spiral drill	1 set
	边刷 Side brush	1 set
	冰刀 Ice skate blade	1 pcs
	冰刀架及浇冰系统 Ice knife holder and ice pouring system	1 set
	雪地防滑轮胎 Snow tires	4 pcs
	清洁毛巾 Mop-type cleaning towels	1 pcs

RX2916EV-Technical Parameter

Basic parameters

Length (sled closed):  2950mm
Width (stake):  1600mm
Width (body):  1200mm
Height (sled closed):  1898mm

Tires

4-hole aluminum alloy wheels (diagonal hole pitch 101.6.),tires: 23*8.5R12, 6-layer steel tires. allov snow nails implant edon the surface. each wheel bears 650kd.

Front and rear axles

The front axle adopts hydraulic push rod linkage steering system; the rear axle adopts motor integrated differential direct transmission mode, and the rear axle has hydraulic drum brakes; there is no shock absorption device.

Vehicle motion

The electronic accelerator pedal runs in a low-speed gear, with a maximum of 25 km, and the forward and backward gears are electronically adjusted.

Weight

Weight (empty vehicle):  1580kg
Weight (fully loaded):  2080kg
Ice chip box capacity:  1.35m³
water tank:  500L

Appearance

Headlights: Wide-voltage LED far and near light lamps are used.
Vehicle body:
Made of thick steel plate, electrostatic powder paint and some sheet parts.
The new style adopts hot-dip galvanized process.

Transmission part

Wheelbase: 1393mm
Track width: 1059mm

Hydraulic Power Unit

Maintenance free battery: 6V*203Ah*8

Car power

DC brushless high-power motor: 48V/6kw

Basic functions

1. It has the function of scraping the ice surface, collecting snow, and watering the ice surface, and with a side brush.

2.This whole ice truck is an electric driven device with 8 built-in 6V200Ah water batteries, built in 48V power, 48V200Ah, providing sufficient power supply for the truck's power motor and hydraulic power unit.

The appearance dimensions are:
2950 * 1600 * 1898mm.

Packing list of RX2916EV

浇冰车本体	RX2916EV	Ice resurfacer	1PC
刮冰刀（备用件）	Spare parts	Ice skate blade	1PC
备胎（备用件）	Spare parts	Spare tire	1PC
侧边刷毛刷（备用件）	Spare parts	Side brush	1PC
卷龙电机（48V 1200W）（备用件）	Spare parts	48V1.2KW motor	1PC
充电器（非备用件）	Non spare parts	Charger	1PC
卷龙控制器（备用件）	Spare parts	Motor controller	1PC
电位器（5K）（备用件）	Spare parts	Potentiometer（5K）	2PC
红色开关（备用件）	Spare parts	Red switch (emergency stop switch parts)	2PC
刀架拉簧	Spare parts	Tension spring of the tool holder	2PC
边刷开关（备用件）	Spare parts	Side brush switch (spare parts)	1PC
拖布	Spare parts	Mop-type cleaning towel	1PC
不锈钢链条（备用件）	Spare parts	Metal Chain	1PC
皮带（备用件）	Spare parts	Belt at the synchronous wheel	3PC
千斤顶（用于维修的配件）	Accessories used for maintenance	Jack (maximum load capacity 10 tons)	1PC
内六角扳手（用于维修的配件）	Accessories used for maintenance	Allen wrench	1PC
呆口扳手（用于维修的配件）	Accessories used for maintenance	Dumb wrench	1PC
L型扳手（用于维修的配件）	Accessories used for maintenance	L-shaped wrench	1PC
19号套筒（用于维修的配件）	Accessories used for maintenance	No. 19 socket wrench	1PC
活口扳手（用于维修的配件）	Accessories used for maintenance	Adjustable wrench	1PC
冰钉（备用件）	Spare parts	Ice nails	100PC
冰钉扳手（用于维修的配件）	Accessories used for maintenance	Ice nail wrench	1PC
小齿轮（备用件）	Spare parts	Pinion	1PC
6A的保险丝，用于侧边刷电机的保险（备用件）	Spare parts	6A safety device (this is the motor insurance of the side brush, this is a spare part)	1PC

Remarks:
Regarding pallets, you need to choose whether you need to install pallets according to the mode of transportation.
备注：关于托盘，需要根据运输方式，来选择是否需要安装托盘。

RX2916EV-Unloading instructions

Remark: This description applies to the case where the tray has been installed.

备注：此说明适用于已经安装了托盘的情况

Option A

As shown in the diagram, unload the ice resurfacer by forking it from the side.

Option B

As shown in the figure, thread the lifting rope through the bottom of the tray to maintain the balance of the suspended vehicle. Use a crane to lift the ice resurfacer and tray together to a suitable location.

About tray

Whether through option A, option B, or other methods,when the ice resurfacer and tray are unloaded to the appropriate position together, the ice resurfacer can be unloaded from the tray in the following ways.
Firstly, remove the outer packaging, especially the devices used to secure the wheels such as tying ropes;
Secondly, install a portable ramp device;
Thirdly, start the ice resurfacer and drive it away from the tray.

Previous： RX4020EV

Next： DZC-1700EV

Return

Scan it