Contacts:Ernest Tel:+86 13906530810 Tel:+0573 87968816 E-mail:‍ernestlu@qq.com‍

PRODUCTS

Home Products

DZC-1700EV

Products > DZC-1700EV

DZC-1700EV

Basic functions
1.It has the function of scraping the ice surface ,
collecting snow, and watering the ice surface ,
and there is no side brush. (But you can add a
side brush by adding money).
2.This whole ice truck is an electric driven
device with 8 built-in 6V203Ah water batteries,
which can provide Provide sufficient electricity
to power the vehicle's electric motor and
hydraulic power unit
The appearance dimensions are:
2930 * 1600 * 1898mm.

Technical specifications of DZC-1700EV

Basic parameters 基本参数	长度（雪橇关闭）	Length (sled closed)	2930mm
	宽度（刮刀座）	Width (stake)	1600mm
	高度（雪橇关闭）	Height (sled closed)	1898mm
	长度（雪橇打开）	Length (sled open)	3330mm
	宽度（车身）	Width (body)	1200mm
	高度（雪橇打开）	Height (sled open)	2722mm
Rotating part 转动部分	驱动方式	Drive way	High power motor 48V 6kw
	轮距	Track width	1059mm
	轴距	Wheelbase	1393mm
	最大作业速度	Operating speed	20km/h
Power 功率	电压/总功率	Voltage/total power	48V/10.4kw
	上卷龙电机功率	Vertical spiral drill motor power	1200W
	下卷龙电机功率	Horizontal spiral drill motor power	1200W
	驱动功率	Accumulator capacity	48V 203A
Weight 重量	重量（空车）	Weight (empty vehicle)	1450kg
Weight 重量	重量（满载）	Weight (fully loaded)	1750kg
Collecting refrigerators 集冰箱	冰屑箱容量	Ice chip box capacity	1.35m³
	水箱	Water tank	300L
	整冰宽度	Whole ice width	1600mm
	水箱加满最大浇冰面积	Maximum ice pouring area	800m²
Hardware installed in the car 已安装在车子上面的配件	横绞龙	Horizontal spiral drill	1 set
	立绞龙	Vertical spiral drill	1 set
	冰刀	Ice skate blade	1 pcs
	冰刀架及浇冰系统	Ice knife holder and ice pouring system	1 set
	雪地防滑轮胎	Snow tires	4 pcs
	清洁毛巾	Mop-type cleaning towels	1 pcs

DZC-1700EV-Technical Parameter

Basic parameters

Length (sled closed):  2930mm
Width (slake):  1600mm
Width (body):  1200mm
Height (sled closed):  1898mm

Tires

4-hole aluminum alloy wheels (for Corner hole spacing of 100), tire: 23 * 8.5-12, 6-layer steel wire tire, surface implanted with alloy snow studs, load-bearing capacity per wheel 650kg

Front and rear axles

The front axle adopts a hydraulic push rod linkage steering system; The rear axle adopts a motor integrated differential direct transmission mode,wheel axle with hydraulic drum brake. No shock-absorbing device

Vehicle motion

Electronic accelerator pedal, operates in low gear, reaches a maximum of 20 km/h, and electronically adjusts the forward and reverse gears.

Weight

Weight (empty vehicle):  1450kg
Weight (fully loaded):  1750kg
Ice chip box capacity:  1.35m³
water tank:  300L

Appearance

Headlights:Adopting wide voltage LED high and low beam headlights.
Vehicle body:Made of thick steel plate, electrostatic powder coating and some stainless steel sheet metal parts.The new style adopts hot-dip galvanized process.

Transmission part

Wheelbase: 1393mm
Track width: 1059mm

Hydraulic Power Unit

Maintenance free battery: 6V*203Ah*8

Car power

DC brushless high-power motor: 48V/6kw

Basic functions

1.It has the function of scraping the ice surface, collecting snow, and watering the ice surface, and there is no side brush. (But you can add a side brush by adding money).
2.This whole ice truck is an electric driven device with 8 built-in 6V203Ah water batteries, which can provide Provide sufficient electricity to power the vehicle's electric motor and hydraulic power unit

The appearance dimensions are:
2930 * 1600 * 1898mm.

Packing list of DZC-1700EV

浇冰车本体	DZC-1700EV	Ice resurfacer	1PC
刮冰刀（备用件）	Spare parts	Ice skate blade	1PC
备胎（备用件）	Spare parts	Spare tire	1PC
卷龙电机（48V 700W）（备用件）	Spare parts	48V 700W motor	1PC
充电器（非备用件）	Non spare parts	Charger	1PC
卷龙控制器（备用件）	Spare parts	Motor controller	1PC
电位器（5K）（备用件）	Spare parts	Potentiometer（5K）	2PC
红色开关（备用件）	Spare parts	Red switch (emergency stop switch parts)	2PC
刀架拉簧	Spare parts	Tension spring of the tool holder	2PC
后托拉簧	Spare parts	Rear support spring	8PC
边刷开关（备用件）	Spare parts	Side brush switch (spare parts)	1PC
拖布（备用件）	Spare parts	Mop-type cleaning towel	1PC
不锈钢链条（备用件）	Spare parts	Metal Chain	1PC
皮带（备用件）	Spare parts	Belt at the synchronous wheel	3PC
千斤顶（用于维修的配件）	Accessories used for maintenance	Jack (maximum load capacity 10 tons)	1PC
内六角扳手（用于维修的配件）	Accessories used for maintenance	Allen wrench	1PC
呆口扳手（用于维修的配件）	Accessories used for maintenance	Dumb wrench	1PC
L型扳手（用于维修的配件）	Accessories used for maintenance	L-shaped wrench	1PC
19号套筒（用于维修的配件）	Accessories used for maintenance	No. 19 socket wrench	1PC
活口扳手（用于维修的配件）	Accessories used for maintenance	Adjustable wrench	1PC
冰钉（备用件）	Spare parts	Ice nails	100PC
冰钉扳手（用于维修的配件）	Accessories used for maintenance	Ice nail wrench	1PC
小齿轮（备用件）	Spare parts	Pinion	1PC

Remarks:
Regarding pallets, you need to choose whether you need to install pallets according to the mode of transportation.
备注：关于托盘，需要根据运输方式，来选择是否需要安装托盘。

DZC-1700EV-Unloading instructions

Remark: This description applies to the case where the tray has been installed.

备注：此说明适用于已经安装了托盘的情况

Option A

As shown in the diagram, unload the ice resurfacer by forking it from the side.

Option B

As shown in the figure, thread the lifting rope through the bottom of the tray to maintain the balance of the suspended vehicle. Use a crane to lift the ice resurfacer and tray together to a suitable location.

About tray

Whether through option A, option B, or other methods,when the ice resurfacer and tray are unloaded to the appropriate position together, the ice resurfacer can be unloaded from the tray in the following ways.
Firstly, remove the outer packaging, especially the devices used to secure the wheels such as tying ropes;
Secondly, install a portable ramp device;
Thirdly, start the ice resurfacer and drive it away from the tray.

Previous： RX2916EV

Next： DZC-1200EV

Return

Scan it